One of the wonders associated with diving is the view underwater, corals, fish, and the rest of the marine fauna hidden in the depths. In that sense, to fully enjoy it, it is essential for divers to have the appropriate clothing.
Since your eyesight essentially depends on the masks, there are quite useful tricks that will help you enjoy the experience. In short, know how to choose them and clean them so that they fog up.
Getting the perfect dive viewer is influenced, specifically, by three independent features. Once inside the market, or the department stores that offer these items to their customers, they will notice that, among so many options, things get a little complicated.
Choose Right Scuba Mask with Right Size
It is not possible to affirm that a certain model adapts to one or the other face. In fact, professional divers insist that masks should be purchased directly from a store-unless the sizes are already known. This, of course, is because each person has a facial shape of their own.
The face, although guided by aesthetic patterns, fluctuates so much for people, that a full-face diving mask must offer, above all, perfect fixation. If it slips, takes off, or is uncomfortable to carry, it may be that the experience, in the end, is not as profitable as expected.
To know if a diving mask fits properly to the face, the first thing that the client should appreciate is that it is not too loose or tight, in the first case, because there is a risk of losing it during the day of diving and, in the second, because it would be uncomfortable to carry something tight to the face.
The term “fit like a glove”, perfectly evokes what a diver should expect from his tool: a mask that fits.
The issue with each buyer is that they are always looking for something that suits their needs. In this sense, the divers are quite clear: they need a mask – and in general, a team – to help them navigate freely in the ocean.
The capacity of the masks, on the other hand, is limited to the level of vision they allow. For example, for those who study marine flora and fauna, it is essential that their viewfinder can filter or hide the light, submerge so many meters and adjust to sea temperatures.
Assessing the ability of a diving mask depends on two factors: the model and the price. Some brands, naturally, get a boom in the market because users are satisfied with their service. In this case, Scuba is a favorite because of the adaptability to environments and people.
When it comes to masks for diving, the manufacturing materials vary from PVC to rubber, or silicon – due to their crystalline condition. The rubber previously used frequently, lost continuity since it dries very easily, and also tightens and prevents the correct entry of light.
The materials, in perspective, determine how resistant a diving mask is, which leaves two options on the table: PVC and silicone. The first is still used, but with the disadvantage of leaking into too cold water. Therefore, and given its excellence, silicone becomes the best material for this piece.
However, it does not depend solely on the material. The strap and buckles that hold the mask in place are just as important. Generally, they are found in alloys similar to those of the mask material, but neither is it a mandatory quality, as long as they are synthetic and easy to press and release, they work.
How to Defog Snorkel Mask?
If purchasing this item is important, keeping it in good condition is essential. And since a diving mask does not require, in theory, much care, crystal concentrates all attention.
To clean a mask and be successful, there are several methods. Currently, Internet users recommend burning with toothpaste.
Step 1: Dreaded Mask Burning Method to defog
Some people consider this as an unsafe alternative to clean the fog of the diving mask – the most common problem when acquiring one. However, the visors, being made of tempered glass, are covered with silicone that cannot, under any circumstances, be exposed to heat.
What does this mean? That by common sense, if you are going to resort to this method you have to take the proper precautions. This goes from preventing children from doing a job that is for adults, to consulting reliable sources who have tried to clean their visors in this way and succeeded.
Despite the warnings, the burn method is rated as one of the most effective. However, to carry it out, the following forecasts are recommended.
When proceeding with the lighter method, it is almost mandatory to move the exterior of the mask away. This means, in a few words, that the user should only burn the interior of the viewer. Also, the flame of the lighter should be prudently removed from the surface, as high temperatures can atrophy the edges of the viewfinder.
Another tip when using this method is to take care of the frequency of the lighter. In order not to hurt the skin, interludes are useful. Instead of keeping the lighter perpetually on the lens, expecting it to work faster, the person can hold it for a couple of minutes and then rest from the heat. The mask and his own fingers will be glad later.
If the diving lenses are made of plastic or some fluctuation of the material, the lighter method cannot be used, unless they want a visor melted by the consummation of the fire.
Finally, as the viewer will reach high temperatures, special care must be taken afterward. Leaving the mask to rest before rubbing the toothpaste is, logically, what the community recommends on the Internet.
Step 2: Rub Toothpaste into the Burnt Mask
In addition to cleaning the mist, a series of tutorials have already been discovered that demonstrate the effectiveness of toothpaste to clean surfaces, repair discs, and a host of other domestic issues. However, few know how to answer why the creation to clean teeth has these qualities.
In essence, everything is based on fluorine. Thanks to him, the toothpaste – regular – removes each of the coatings that can minimize the visibility of the mask. Smearing and rubbing repeatedly should suffice, although several people recommend leaving it for the interval of 1 hour to obtain more satisfactory results.
To finish cleaning, simply rinse in warm water and witness how the magic happens. If it comes within the availability of each person, the shampoo for babies will also contribute to the aesthetically better viewfinder.
Warnings And Final Thoughts:
Economical, practical, and easy to carry out, this was, is, and will be the method par excellence. However, before considering it, it is also important that people stick to the following.
When working with fire, it is essential to keep children away from this function, as well as to avoid bringing this abrasive element to the flammable parts of the mask.
Finally, although the method of home cleaning works perfectly, it will never be a superfluous expense – at least for regular drivers – to invest in an anti-fog liquid that can be obtained in pharmacies or stores specializing in the sale of diving tools. Thus, you will avoid the constant cleaning of your lenses.